Controlled release from zein matrices: Interplay of drug hydrophobicity and pH

Purpose: In earlier studies, the corn protein zein is found to be suitable as a sustained release agent, yet the range of drugs for which zein has been studied remains small. Here, zein is used as a sole excipient for drugs differing in hydrophobicity and isoelectric point: indomethacin, paracetamol and ranitidine. Methods: Caplets were prepared by hot-melt extrusion (HME) and injection moulding (IM). Each of the three model drugs were tested on two drug loadings in various dissolution media. The physical state of the drug, microstructure and hydration behaviour were investigated to build up understanding for the release behaviour from zein based matrix for drug delivery. Results: Drug crystallinity of the caplets increases with drug hydrophobicity. For ranitidine and indomethacin, swelling rates, swelling capacity and release rates were pH dependent as a consequence of the presence of charged groups on the drug molecules. Both hydration rates and release rates could be approached by existing models. Conclusion: Both the drug state as pH dependant electrostatic interactions are hypothesised to influence release kinetics. Both factors can potentially be used factors influencing release kinetics release, thereby broadening the horizon for zein as a tuneable release agent

Utjecaj različitih površinski aktivnih tvari i njihovih koncentracija na kontrolirano oslobađanje kaptoprila iz polimernih matriksa

Various methods are available to formulate water soluble drugs into sustained release dosage forms by retarding the dissolution rate. One of the methods used to control drug release and thereby prolong therapeutic activity is to use hydrophilic and lipophilic polymers. In this study, the effects of various polymers such as hydroxypropyl methylcellulose (HPMC), ethylcellulose (EC) and sodium carboxymethylcellulose (CMC) and surfactants (sodium lauryl sulphate, cetyltrimethylammonium bromide and Arlacel 60) on the release rate of captopril were investigated. The results showed that an increase in the amount of HPMC K15M resulted in reduction of the release rate of captopril from these matrices. When HPMC was partly replaced by NaCMC (the ratio of HPMC/NaCMC was 5:1), the release rate of the drug significantly decreased. However, there was no significant difference in release rate of captopril from matrices produced with ratios of 5:1 and 2:1 of HPMC/NaCMC. The presence of lactose in matrices containing HPMC and NaCMC increased the release rate of captopril. It was interesting to note that although partial replacement of HPMC by EC reduced the release rate of the drug (ratio of HPMC/EC 2:1), the release rate was increased when the ratio of HPMC/EC was reduced to 1:1. The effects of various surfactants on the release rate of captopril from HPMC/EC 1:1 matrices were also investigated. The results showed that the surfactants did not significantly change the release rate of the drug. Release data were examined kinetically and the ideal kinetic models were estimated for the drug release. The kinetic analysis of drug release data from various formulations showed that incorporation of surfactants in HPMC/EC matrices did not produce a zero-order release pattern.Postoje različite metode formuliranja vodotopljivih lijekova u dozirane ljekovite oblike s polaganim oslobađanjem. Jedan od načina postizanja kontroliranog otpuštanja, a prema tome i produljenog učinka je upotreba hidrofilnih i lipofilnih polimera. U ovom radu proučavan je utjecaj različitih polimera poput hidroksipropil metilceluloze (HPMC), etilceluloze (EC) i natrijeve soli karboksimetilceluloze (NaCMC) i površinski aktivnih tvari (natrijevog lauril-sulfata, cetiltrimetilamonijevog bromida i Arlacela 60) na oslobađanje kaptoprila. Rezultati pokazuju da povećanje količine HPMC K15M ima za posljedicu smanjenje oslobađanja kaptoprila iz matriksa. Ako se HPMC djelomično zamijeni s NaCMC (omjer HPMC/NaCMC 5:1), oslobađanje ljekovite tvari značajno se smanjuje. Međutim, nema značajne razlike u oslobađanju kaptoprila iz matriksa s omjerom HPMC/NaCMC 5:1 i 2:1. Prisutnost laktoze u matriksu koji sadrži HPMC i NaCMC povećalo je oslobađanje kaptoprila. Iako djelomična zamjena HPMC s EC smanjuje oslobađanje ljekovite tvari (omjer HPMC/EC 2:1), oslobađanje se povećava uz omjer HPMC/EC 1:1. Nadalje, ispitivan je utjecaj površinski aktivnih tvari na oslobađanje kaptoprila iz matriksa u kojima je omjer HPMC/EC (1:1). Može se zaključiti da površinski aktivne tvari ne utječu značajno na oslobađanje ljekovite tvari. U sklopu istraživanja određen je i kinetički model oslobađanja kaptoprila. Analiza kinetičkih podataka ukazuje da dodatak površinski aktivnih tvari u HPMC/EC matrikse ne slijedi kinetiku nultog reda

Chitosan encapsulation modulates the effect of capsaicin on the tight junctions of MDCK cells

Capsaicin has known pharmacological effects including the ability to reversibly open cellular tight junctions, among others. The aim of this study was to develop a strategy to enhance the paracellular transport of a substance with low permeability (FITC-dextran) across an epithelial cell monolayer via reversible opening of cellular tight junctions using a nanosystem comprised by capsaicin and of chitosan. We compared the biophysical properties of free capsaicin and capsaicin-loaded chitosan nanocapsules, including their cytotoxicity towards epithelial MDCK-C7 cells and their effect on the integrity of tight junctions, membrane permeability and cellular uptake. The cytotoxic response of MDCK-C7 cells to capsaicin at a concentration of 500 μM, which was evident for the free compound, is not observable following its encapsulation. The interaction between nanocapsules and the tight junctions of MDCK-C7 cells was investigated by impedance spectroscopy, digital holographic microscopy and structured illumination fluorescence microscopy. The nanocapsules modulated the interaction between capsaicin and tight junctions as shown by the different time profile of trans-epithelial electrical resistance and the enhanced permeability of monolayers incubated with FITC-dextran. Structured illumination fluorescence microscopy showed that the nanocapsules were internalized by MDCK-C7 cells. The capsaicin-loaded nanocapsules could be further developed as drug nanocarriers with enhanced epithelial permeability

Amorphous formulations of indomethacin and griseofulvin prepared by electrospinning

Following an array of optimization experiments, two series of electrospun polyvinylpyrrolidone (PVP) fibers were prepared. One set of fibers contained various loadings of indomethacin, known to form stable glasses, and the other griseofulvin (a poor glass former). Drug loadings of up to 33% w/w were achieved. Electron microscopy data showed the fibers largely to comprise smooth and uniform cylinders, with evidence for solvent droplets in some samples. In all cases, the drug was found to exist in the amorphous physical state in the fibers on the basis of X-ray diffraction and differential scanning calorimetry (DSC) measurements. Modulated temperature DSC showed that the relationship between a formulation’s glass transition temperature (<i>T</i>_g) and the drug loading follows the Gordon–Taylor equation, but not the Fox equation. The results of Gordon–Taylor analysis indicated that the drug/polymer interactions were stronger with indomethacin. The interactions between drug and polymer were explored in more detail using molecular modeling simulations and again found to be stronger with indomethacin; the presence of significant intermolecular forces was further confirmed using IR spectroscopy. The amorphous form of both drugs was found to be stable after storage of the fibers for 8 months in a desiccator (relative humidity <25%). Finally, the functional performance of the fibers was studied; in all cases, the drug-loaded fibers released their drug cargo very rapidly, offering accelerated dissolution over the pure drug

Učinak topljivosti na kinetiku oslobađanja vodotopljivih i vodonetopljivih lijekova iz matriksnog sustava na bazi HPMC

The purpose of the present research work was to observe the effects of drug solubility on the release kinetics of water soluble verapamil hydrochloride and insoluble aceclofenac from polymer based matrix formulations. Matrix formulations were prepared by the direct compression method. The formulations were evaluated for various physical parameters. Along with the dynamics of water uptake and erosion, SEM and in vitro drug release of tablets were studied. Applying an exponential equation, it was found that the kinetics of soluble drug release followed anomalous non-Fickian diffusion transport whereas insoluble drug showed zero-order release. SEM study showed pore formation on the tablet surface that differed depending on drug solubility. t-Test pointed to a significant difference in the amount of both drugs released due to their difference in solubility. Solubility of the drug affects the kinetics and the mechanism of drug release.Cilj rada bio je praćenje učinka topljivosti na kinetiku oslobađanja vodotopljivog verapamil hidroklorida i netopljivog lijeka aceklofenaka iz matriksnih sustava na bazi hidrofilnog polimera. Matriksni sustavi pripravljeni su izravnom metodom kompresije. Uz ispitivanje uobičajenih fizikalnih svojstava, ispitivana je i dinamika primanja vode, te erozija, SEM i in vitro oslobađanje ljekovite tvari iz tableta. Primjenom eksponencijalne jednadžbe utvrđeno je da mehanizam oslobađanja topljivih lijekova slijedi anomalni ne-Fickov difuzijski transport, dok netopljivi lijekovi slijede kinetiku nultog reda. SEM ispitivanja pokazala su pore na površini matriksa ovisne o topljivosti ljekovite tvari. T-test ukazuje da količina oslobođenog lijeka značajno ovisi o njegovoj topljivosti. Topljivost lijeka ima značajan učinak na kinetiku i mehanizam oslobađanja

Functional characterisation and antimicrobial efficiency assessment of smart nanohydrogels containing natamycin incorporated into polysaccharide-based films

The potential application of polysaccharide-based films containing smart nanohydrogels for the controlled release of food preservatives is demonstrated here. Smart active packaging is the most promising alternative to traditional packaging as it provides a controlled antimicrobial effect, which allows reducing the amount of preservatives in the food bulk, releasing them only on demand. This work evaluates the usefulness of smart thermosensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels with or without acrylic acid (AA) incorporated into polysaccharide-based films (GA) to transport natamycin and release it as a response to environmental triggers. Release kinetics in liquid medium from GA films containing PNIPA/AA nanohydrogels (GA-PNIPA(5) and GA-PNIPA-20AA(5)) presented a characteristic feature regarding the films without nanohydrogels that was the appearance of a lag time in natamycin release, able to reach values of around 35 h. Another important feature of natamycin release kinetics was the fact that the release from GA-PNIPA/AA films only occurred when temperature was increased, so that the natamycin release was restricted to when there is a risk of growth of microorganisms that cause food spoilage or the development of pathogenic microorganisms. Additionally, it could be observed that the relative fraction of natamycin released from GA-PNIPA/AA films was significantly (p<0.05) higher than that released from GA films loaded with the same amount of free natamycin. It can be hypothesised that the encapsulation of natamycin into nanohydrogels helped it to be released from GA films, creating reservoirs of natamycin into the films and, therefore, facilitating its diffusion through the film matrix when the nanohydrogel collapses. In a solid medium, the low water availability limited natamycin release from GA-PNIPA/AA films restricting the on/off release mechanism of PNIPA/AA nanohydrogels and favouring the hydrophobic interactions between natamycin and polymer chains at high temperatures. Despite the low natamycin release in solid media, antimicrobial efficiency of GA-PNIPA(5) films containing natamycin in acidified agar plates was higher than that obtained with GA films without natamycin and GA films with free natamycin, probably due to the protecting effect against degradation when natamycin was included in the nanohydrogels, allowing its release only when the temperature increased.Clara Fucinos and Miguel A. Cerqueira are recipients of a fellowship (SFRH/BPD/87910/2012 and SFRH/BPD/72753/2010, respectively) from the Fundacao para a Ciencia e Tecnologia (FCT, POPH-QREN, and FSE Portugal). The authors thank the FCT Strategic Project PEst-OE/EQB/LA0023/2013 and the project "BioInd - Biotechnology and Bioengineering for improved Industrial and Agro-Food processes", Ref. NORTE-07-0124-FEDER-000028 co-funded by the Programa Operacional Regional do Norte (ON.2 - O Novo Norte), QREN, FEDER and the project from the "Ministerio de Educacion y Ciencia" (Spain) "Nanohidrogeles inteligentes sensibles a cambios de pH y Temperatura: Diseno, sintesis y aplicacion en terapia del cancer y el envasado activo de alimentos", Ref. MAT2010-21509-C03-01

Tunable Growth Factor Delivery from Injectable Hydrogels for Tissue Engineering

Current sustained delivery strategies of protein therapeutics are limited by the fragility of the protein, resulting in minimal quantities of bioactive protein delivered. In order to achieve prolonged release of bioactive protein, an affinity-based approach was designed which exploits the specific binding of the Src homology 3 (SH3) domain with short proline-rich peptides. Specifically, methyl cellulose was modified with SH3-binding peptides (MC-peptide) with either a weak affinity or strong affinity for SH3. The release profile of SH3-rhFGF2 fusion protein from hyaluronan MC-SH3 peptide (HAMC-peptide) hydrogels was investigated and compared to unmodified controls. SH3-rhFGF2 release from HAMC-peptide was extended to 10 days using peptides with different binding affinities compared to the 48 h release from unmodified HAMC. This system is capable of delivering additional proteins with tunable rates of release, while maintaining bioactivity, and thus is broadly applicable